We're really hashing this one to death!
Needless to say, over 35 years of HR I still remember using the '220
with a tube-operated HB 80-10 xcvr, and I worked CW (sans QSK, of course), and
SSB with no problems.
After some experience in BC radio I liked to gently warm up filaments to avoid
sag as much as possible and that may have been the reason for the inrush
resistor. It's >25 years since and there's a lot of fish fried in that pan.
Whatever happened to AMP SUPPLY? There's one model they made, the LK-500Z that
had three 3-500Z's. I added a grid current monitor board and a set of nichrome
parasitic chokes and that amp did real well. I'd love to have one of those
again.
Lastly, the stupidest move I ever made was selling my 77-Sx for $4K.
There's another unit I'd spend the big bucks on. Dual 8877's and the amp
modified for grid control and parasitics: 5.1 KW if I wanted to be crazy, but
at 2KW it just loafed. Find me one of them and I'd spend the big bucks all over
again.
The only facet of the '220 that I can remember as not too appealing was the
color scheme. Heath made a hell of an amp kit. It was worth every nickel and it
kept on working.
Hal
KA1XO/4
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|