Amps
[Top] [All Lists]

Re: [Amps] 3cx1200a7 and 3cx1200z7 datasheets

To: Ed Briggs <edbriggs@optonline.net>, AMPS <amps@contesting.com>
Subject: Re: [Amps] 3cx1200a7 and 3cx1200z7 datasheets
From: rlm < <r@somis.org>>
Date: Mon, 3 Nov 2003 01:39:38 -0800
List-post: <mailto:amps@contesting.com>

On Sunday, November 2, 2003, at 09:04 AM, Ed Briggs wrote:


Does anyone have a 3cx1200a7 datasheet I could have a look at? I am also
looking for the z7.


*** Ed -- Richardson Electronics in Chicago stocks the ...Z7. The last time I checked it was $19 more than an ...A7.
-- The ...A7 is pretty similar to the obsolete 3-1000Z. If you build a ...Z7 amplifier, it might be a prudent to use a grid-grounding collet made from finger-stock in lieu of grounding through the 3 grid pins on the socket. Eimac probably makes one since they make a grid collet for the 8877.


I have the summary sheets from the Eimac website, but would like additional
information. (Incidentally G8WRB's website doesn't have these).


Thanks in advance !

Ed


Rich Measures, AG6K, 805.386.3734. www.somis.org/

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>