Kings electronics makes them and allied stocks.
SHV 5KV DC.
Cost you under $100 for two chassis mount and two plugs.
They have some good to 30KV DC
-bob
George & Marijke Guerin wrote:
>Jim, et. al.,
>
> For HV insulated wire go to a neon sign company. They typically have
>rolls of very wiring in 14 gauge with 15KV insulation or better. I was given
>some 3 foot scraps from a field installation for rewiring inside a Drake L7
>power supply. By the way, I have not found a connector good for more than 3
>KV. The Millen unit can leak around the HV wire at higher voltages. I
>would put a gromet in a chassis panel hole and pull the wire through to a
>well insulated terminal strip at each end.
>
|