[Amps] electronic switching

[DF3KV at aol.com (DF3KV@aol.com)]

K4TAX wrote:

>I use a pin diode switch at the antenna to switch the pre-amp in and out
>during TX and RX cycles. ?I supply RF (lots of it) and 12VDC. ? ?This is in
>a 50 ohm VHF circuit running "legal limit" so to speak. ?The preamp has a nf
>of something like 0.3dB and a gain of 20 dB.
>
>I don't see the problem or concern in a 50 ohm application. ?As to switching
>at a PA Z.......forget it.

Leif,SM5BSZ switches his highpower EME-amp with
pindiodes:

http://www.g7rau.co.uk/sm5bsz/pindiode.htm

73
Peter