[Amps] anyone used 2 x 4-250b in parallel on six

Amps

[Amps] anyone used 2 x 4-250b in parallel on six

To:	<amps@contesting.com>
Subject:	[Amps] anyone used 2 x 4-250b in parallel on six
From:	pe2six at xs4all.nl (Erwin Cremers)
Date:	Thu Jun 19 08:32:01 2003

I'm thinking of building an amplifier for
six meter using two qb3.5/750 ie 4-250b in parallel.

But was wondering if there is anyone out there who could give me some
advice on the construction of the tank/anode circuit?

HV = 3Kv

All tips are welcome.

regards,

Erwin PE2SIX

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] anyone used 2 x 4-250b in parallel on six, Erwin Cremers <= [Amps] anyone used 2 x 4-250b in parallel on six, Bnovy1@aol.com [Amps] anyone used 2 x 4-250b in parallel on six, peter.chadwick@Zarlink.Com

Previous by Date:	[Amps] Drake L4B Components, w2cqm@juno.com
Next by Date:	[Amps] electronic switching, 2
Previous by Thread:	[Amps] Drake L4B Components, w2cqm@juno.com
Next by Thread:	[Amps] anyone used 2 x 4-250b in parallel on six, Bnovy1@aol.com
Indexes:	[Date] [Thread] [Top] [All Lists]