The Gonset amp model GSB-201 used 4 811A tubes, while the GSB-201A used 4
572Bs.
73 - Mark, AA6DX
---- Original Message -----
From: "RICK COLE" <vk3ym@iprimus.com.au>
To: <Amps@contesting.com>
Sent: Thursday, June 12, 2003 6:06 AM
Subject: [Amps] RE Gonset 4 x 807 amp
Many thanks to all who replied with my query regarding this amp...
As far as the information relates, this amp was either not a successful
item or people just did not want such a low powered cheap unit...It was on
the market for an extremely short period of time {unknown} and was followed
by a unit with firstly 4 x modified 1625's and then 4 x 811's..
Only one person on the reflector replied that he had actually owned such
an amp while all others either queried the type of tube ie 807's or asked if
i had made a mistake and should have quoted the 1625's or the more familiar
811's...
Still no schematic has been obtained but enough information was given to be
able to draw a simplified one with all major component values and voltages
known..
I want to thank all those who replied..
Regards Rick
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|