I just had a plate transformer manufactured at MAGCAP engineering in Canton,
MA.
A picture of it is on www.geocities.com/chuckwsh
<http://www.geocities.com/chuckwsh>
check it out, its 48# and dimensions are appx 8"h x 10" d x 8 w ( i forget
EXACT measurements)
and the ratings are as follows...
2700v @ 1.5 amp. Acording to RL's pages, the secondary measures 67 ohms.
looks ike 1.33@ is the number.
280$ brand new 5 days to make! they have a web page someplace look up
magcap engineering..
I used to use them for other things liek HV caps and chokes 20 years ago
when I was at raytheon.
better for me than PW dahl. they also use a hypersil core.
I am in NO way affiliated with this company or back thier products. this is
an FYI for decent magnetics.
(got tired of looking on ebay and didn't wannapay dahl 350$+)
Chuck Partain
maXtor Corp
333 South Street
Shrewsbury, MA 01545
ph (508)770-3496
Fax (508)770-5868
|