Amps
[Top] [All Lists]

[Amps] Plate Chokes

To: <amps@contesting.com>
Subject: [Amps] Plate Chokes
From: kc4slk at csrlink.net (Mike Sawyer)
Date: Thu Apr 3 17:58:13 2003
Beware of  144 Mhz. spurs. My friend's 813 amp was a great vhf spur generator 
until he replaced the traditional parasitic chokes with NiChr hairpins. 
Mike(y)
W3SLK
----- Original Message ----- 
From: "2" <2@vc.net>
To: "G. Clute" <gclute@attbi.com>; " AMPS" <amps@contesting.com>
Sent: Thursday, April 03, 2003 8:28 AM
Subject: Re: [Amps] Plate Chokes


An 813's grid-resonance and screen-resonance are above its f-max of 
30MHz, which is probably why I have not yet heard about a parasite with 
the 813 in g-g config.
 --  (4) 813s is a good choice for SSB.

>
>Aquiring parts for a 160 amplifier. Planning on (4) 813's with a tank
>circuit of 11 mh and 1000pf, but I've seen plate chokes from 47 ohms
>to 220 ohms and 2 turns up to 8 turns.   I've also seen Amidon beads.
>Is there a formula for paracitics below 30 Mhz?
>
>Geo W7LFD
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>


-  R. L. Measures, a.k.a. Rich..., 805.386.3734, AG6K, 
www.vcnet.com/measures.  
end

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



<Prev in Thread] Current Thread [Next in Thread>