Hi all,
This weekend, two of us will be keying a TL-922 (his) with an FT-990 (mine)
for this one time only in the CQ160. Just want to be sure I'm reading the
manual correctly....
1) What is the t/r keydown voltage and current on the TL-922 at the PTT jack
(and can the FT-990, rated at up to 50vdc and 500mA handle it - don't want
to activate the internal relay for one weekend)?
2) Using the "remote" jack on the 990, and not worrying about QSK, would pin
4 and pin 3 be the pins???
Thanks... see you on 160m!
David VE3STT
ve3stt@rac.ca
|