[Amps] Amp Problem Solved

[edw3nr@nexband.com (Ed)]

Thanks to all (and I mean many) that offered help and guidance on my problem
with no idling plate current. The culprit turned out to be the plate choke.
Didn't discover the bad solder joint till it  was turned over and I could
see the bottom side of it. Agn....TNX ......73

Ed W3NR


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <amps@contesting.com>
Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/2003