Steve,
The 4 wires that you refer to in distribution systems most likely consist of
3 phases on top and a neutral below. Skin effect is taken into consideration
in high current applications such as generating stations and substations,
where hollow aluminum buss is very commonly used.
Jeff - K1LE ><>
----- Original Message -----
From: "STEVE---W5SET" <w5set@alltel.net>
To: "amp" <amps@contesting.com>
Sent: Friday, October 04, 2002 11:56 PM
Subject: Fw: [Amps] skin effect
>
> you mean that those 4 wires (3 across top--one under) are one
> multi-conductor phase? on top of the power poles i see all over?
>
|