Maybe Singapore is now in step with most of the planet.
>Rich,
>'Singapore where they have 100v/200v, 50Hz'
>Really?, I was there last week and it measured 236V (ish).
Is it 60Hz?
>Seem to
>remember it's always been about that but I can only go back about 14
>years. I recall JA as being a nominal 100V though.
>
>Never knew they made Henry's in 9V. I go down there every couple of
>months or so. But I bet there's nothing left to say they were ever
>there.
>
>73's
>Martin de HS0/G4UQF
>
>
>-----Original Message-----
>From: amps-admin@contesting.com [mailto:amps-admin@contesting.com] On
>Behalf Of 2
>Sent: 29 August 2002 05:07
>To: Steve Katz; Randall DuCharme; AMPS
>Subject: RE: [Amps] Which 3-500Z
>
>
>The voltage on 1kd-5 and 2kd-5 filaments would be c. 5v in Singapore
>where they have 100v/200v, 50Hz.. As understand it, both amps were mfg
>in Singapore.
>
>>When I had a 2KD5 many years ago, even its filament voltage was too
>>high with the normal 240V operating primary tap. What were they
>>thinking? (It was probably just about right for operating in VK with
>>265V line voltage...) -WB2WIK/6
>
>
>- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
>www.vcnet.com/measures.
>end
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|