Rich,
'Singapore where they have 100v/200v, 50Hz'
Really?, I was there last week and it measured 236V (ish). Seem to
remember it's always been about that but I can only go back about 14
years. I recall JA as being a nominal 100V though.
Never knew they made Henry's in 9V. I go down there every couple of
months or so. But I bet there's nothing left to say they were ever
there.
73's
Martin de HS0/G4UQF
-----Original Message-----
From: amps-admin@contesting.com [mailto:amps-admin@contesting.com] On
Behalf Of 2
Sent: 29 August 2002 05:07
To: Steve Katz; Randall DuCharme; AMPS
Subject: RE: [Amps] Which 3-500Z
The voltage on 1kd-5 and 2kd-5 filaments would be c. 5v in Singapore
where they have 100v/200v, 50Hz.. As understand it, both amps were mfg
in Singapore.
>When I had a 2KD5 many years ago, even its filament voltage was too
>high with the normal 240V operating primary tap. What were they
>thinking? (It was probably just about right for operating in VK with
>265V line voltage...) -WB2WIK/6
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
_______________________________________________
Amps mailing list
Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
|