>Rich,
>
>I found the diode in the 800h manual on line. It is for meter protection and
>will usually fail shorted if there is a hv to ground fault.
Agreed
> If a glitch resistor is approx 25-50 ohm at 10 watts or more, then
>there is no such animal in this amp. There is one 10 ohm 10 watt for
>step-start and some 50k 7 watt bleeders.
2, 10-ohm, 10Wers in series would be enough for glitch protection, but a
huskier, 3A diode would still be needed.
>
cheerz, Steve
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|