[Amps] Filter

To:	<amps@contesting.com>
Subject:	[Amps] Filter
From:	philk5pc@tyler.net (Phil Clements)
Date:	Mon, 12 Aug 2002 16:29:04 -0500

> Is it necessary to use a bifilar winding choke (for GG amp)
> for filament or can two separate ferrite rods be used??
>
> Dennis   W7JX

Winding should be bifilar, but donut style can be used as
well as rods.

(((73)))
Phil, K5PC

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Filter, Dennis Watkins [Amps] Filter, Phil Clements <= [Amps] Filter, Dennis Watkins [Amps] Filter, Phil Clements [Amps] Filter, wb8jkr@juno.com [Amps] Filter, Koehl_House [Amps] Use of 60Hz blowers on 50Hz mains for cooling ceramic triodes/tetrodes, Michael J. Tubby B.Sc. (Hons) G8TIC [Amps] Use of 60Hz blowers on 50Hz mains for cooling ceramic triodes/tetrodes, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] Transformer Noise, John [Amps] Transformer Noise, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] Use of 60Hz blowers on 50Hz mains for cooling ceramic triodes/tetrodes, Jeffrey Madore [Amps] Filter, 2

Previous by Date:	[Amps] Filter, Dennis Watkins
Next by Date:	[Amps] Filter, Dennis Watkins
Previous by Thread:	[Amps] Filter, Dennis Watkins
Next by Thread:	[Amps] Filter, Dennis Watkins
Indexes:	[Date] [Thread] [Top] [All Lists]