Conrad, why not use the Motorola MR-760 diodes. They
are 1000 volts at 6
amps. They mainly high pot around 1.5KV They sell for
around .75 at Digikey.
Put some matched resistors and matched capacitors and it
will be bomb proof
for everything but HV to gnd short.
Denis Ve6AQ
Conrad G0RUZ wrote:
> Has anyone ever used the P600M diode in an HT supply, it looks like a good
> choice, twice the current rating of the 1N5408. Any other recommendations
> for a bomb proof rectifier stack? I was thinking of using 8 per leg in my
> test supply which can do 5kV @ 1.75 amps.
>
> Conrad G0RUZ
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
|