[Amps] SB-220 tuning cap needed

Amps

[Amps] SB-220 tuning cap needed

To:	<amps@contesting.com>
Subject:	[Amps] SB-220 tuning cap needed
From:	realex@flash.net (Bob Alexander)
Date:	Mon, 25 Mar 2002 06:12:42 -0600

-----Original Message-----

>rebuilding my sons SB-220... swear he used this thing for a welder. (He's
>an IK8, maybe that has something to do with it!!)  The wider spaced one is
>ok in a pinch, but would rather use the origiinal 26-131 (saves anxiety
>about the bandswitch!)

I do not understand why use of the wider spaced cap would cause anxiety
about the
bandswitch.
Bob, W5AH

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] SB-220 tuning cap needed, Michael J Castellano [Amps] Plate load value, Bill Coleman [Amps] SB-220 tuning cap needed, Richard [Amps] SB-220 tuning cap needed, Bob Alexander <= [Amps] SB-220 tuning cap needed, wb4mnf [Amps] SB-220 tuning cap needed, wlfuqu00@uky.edu [Amps] SB-220 tuning cap needed, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] SB-220 tuning cap needed, Richard [Amps] SB-220 tuning cap needed, Richard [Amps] SB-220 tuning cap needed, wb4mnf [Amps] SB-220 tuning cap needed, Richard

Previous by Date:	[Amps] SB-220 WARC bands, Tom Rauch
Next by Date:	[Amps] SB-220 WARC bands, Pete Smith
Previous by Thread:	[Amps] SB-220 tuning cap needed, Richard
Next by Thread:	[Amps] SB-220 tuning cap needed, wb4mnf
Indexes:	[Date] [Thread] [Top] [All Lists]