Amps
[Top] [All Lists]

[Amps] TenTec Titan 425

To: <amps@contesting.com>
Subject: [Amps] TenTec Titan 425
From: g8gsq@qsl.net (Steve Thompson)
Date: Fri, 8 Mar 2002 17:47:19 -0000
-----Original Message-----
From: Richard <2@mail.vcnet.com>
To: jljarvis <jljarvis@abs.adelphia.net>; AMPS <amps@contesting.com>
To: <amps@contesting.com>
Date: 08 March 2002 16:52
Subject: Re: [Amps] TenTec Titan 425
snip
?  The 425 I worked on exhibited - with a Funderberg high-pot
gold-sputtering test, migrant gold damage in both 3cx800A7s........

I've seen the effect of leakage changing when anode/grid polarity is
reversed in 8875s and 8877s, but I'm puzzled by the mechanism. For gold melt
balls to be the cause, I figure that (a) they must be, and remain,
negatively charged and (b) they must be repelled more by gold wires with -ve
charge than whatever is on the inside of the anode with the same -ve charge
on it. I find both of these counter intuitive - am I missing something?

Steve



<Prev in Thread] Current Thread [Next in Thread>