> -----Original Message-----
> From: Steve Bauder [SMTP:sbauder@wwt.net]
> Sent: Thursday, February 14, 2002 7:07 AM
> To: amps@contesting.com
> Subject: [AMPS] SB-230 plate transformer needed
>
>
> I've just finished converting my 230 to 6 meters, and it's working great
> other than a wimpy replacement transformer installed by a previous
> owner. Not nearly enough iron! Plate voltage drops to about 1300 volts
> under minimal (350ma) load.
>
::What size iron do you need? Did you leave the 8873 in place, or
change to some other tube? I have a 2000VCT, 400mA CCS xfmr (heavy) which
would provide 2.8 kV using a bridge & filter (115V primary), more than
enough iron for a single tube, maybe too much voltage. Let me know.
-WB2WIK/6
> Trading stock includes a 3cx3000 socket, several 4cx250's, a couple
> 4cx250 sockets/ceramic chimneys, or cash!
>
> Steve Bauder, nx9z
> Boyceville, WI
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|