[AMPS] Building new 4-1000A amp

To:	<amps@contesting.com>
Subject:	[AMPS] Building new 4-1000A amp
From:	robrk@pgh.net (robrk)
Date:	Sat, 05 Jan 2002 00:03:26 -0500

If you do the math on a B&W 850, they don't follow the charts from band to
band. 
One of the Bill Orr handbook amps talked about new tap points for some of the
bands. I have a 3-500 amp I followed his numbers and C1/C2 tune where they
should and get good output on all freqs.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Building new 4-1000A amp, (continued) [AMPS] Building new 4-1000A amp, Peter Chadwick [AMPS] Building new 4-1000A amp, Mike McCarthy, W1NR [AMPS] Building new 4-1000A amp, wlfuqu00@uky.edu [AMPS] Building new 4-1000A amp, wlfuqu00@uky.edu [AMPS] Building new 4-1000A amp, Phil (VA3UX) [AMPS] Building new 4-1000A amp, Spencer Petri [AMPS] Building new 4-1000A amp, Terry Gaiser [AMPS] Building new 4-1000A amp, K7RDX [AMPS] Building new 4-1000A amp, Jim Strohm [AMPS] Building new 4-1000A amp, Jon Ogden [AMPS] Building new 4-1000A amp, robrk <= [AMPS] Building new 4-1000A amp, Jon Ogden [AMPS] Building new 4-1000A amp, Jon Ogden [AMPS] Building new 4-1000A amp, Tom Rauch [AMPS] Building new 4-1000A amp, Peter Chadwick [AMPS] Building new 4-1000A amp, Tom Rauch [AMPS] Building new 4-1000A amp, Steve Katz [AMPS] Building new 4-1000A amp, Peter Chadwick [AMPS] Building new 4-1000A amp, Bob Marston

Previous by Date:	[AMPS] Power Limitations in Other Countries, Mark Fancher
Next by Date:	[AMPS] Building new 4-1000A amp, Jon Ogden
Previous by Thread:	[AMPS] Building new 4-1000A amp, Jon Ogden
Next by Thread:	[AMPS] Building new 4-1000A amp, Jon Ogden
Indexes:	[Date] [Thread] [Top] [All Lists]