Amps
[Top] [All Lists]

[AMPS] ALC connection

To: <amps@contesting.com>
Subject: [AMPS] ALC connection
From: kc5ajx@hotmail.com (Rick Bullon)
Date: Sat, 24 Nov 2001 20:15:10 +0000
Thanks for the fast replies. I now know that I can forget about the ALC 
connection that it is not needed and that I should have 4 straps in the 
Clipperton-L.
Luckily when I got the amp I got a parts amp with it so I can take a strap 
from that unit and replace the missing one. But I will not get around to 
this for a while. Still have to finish the tower project first. After all 
the amp does me no good without antennas :-)
73
Rick
KC5AJX


>From: "Rick Bullon" <kc5ajx@hotmail.com>
>To: amps@contesting.com
>Subject: [AMPS] ALC connection
To: <amps@contesting.com>
>Date: Sat, 24 Nov 2001 19:08:46 +0000
>
>
>Hello all
>I have been studding how to connect my Cliperton-L amp up to my TS-940. I
>have seen the circuits for using a transistor to switch the keying on the
>amp and I have looked at the various websites that sell the cables that 
>have
>the keying circuit built into to the cable.
>All these methods handle the keying of the amp from the rig but none of 
>them
>have provisions for the ALC line from the pin on the rig to the ALC plug on
>the amp.
>So my question is how do you handle this?
>I figure if I build my own keying box I can run a separate line from the 
>pin
>on the din plug to the ALC connection but of all the examples I have seen 
>of
>these none have a line for the ALC.
>I know this is a very simple question compared to some of the high tech
>threads on here but I am a novice when it comes to amps. All I have done
>with mine so far is turn it on and make sure all the lights and meters 
>work.
>
>I have one more question. My amp was shipped to me with the tubes
>uninstalled. I have taken the top off the amp mainly to make sure nothing
>was broken and that the 10 meter mod was done.
>My questions is where the 4 572B tubes go there are 3 copper straps with
>rings on the top. I assume that these attach to the top of the tubes. Which
>of the 4 tubes do the three straps go on? Or is there suppose to be 4 
>straps
>and one is missing?
>73
>Rick
>KC5AJX
>Amp Newbie
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>