Amps
[Top] [All Lists]

[AMPS] QY5-3000A in hf amp

To: <amps@contesting.com>
Subject: [AMPS] QY5-3000A in hf amp
From: sm3mxr@swipnet.se (Einar Persson)
Date: Fri, 16 Nov 2001 22:32:17 +0100
Hi Howard
That was a very common tube in Philips radio/TV transmitters in Sweden so
they were quite common here also.
Philips name is QBL5-3500. The tube is also known as 6076.

Here is some info:  http://www.tube.be/6076.html

A few Swedish hams are using that tube type in a G2DAF circuit for the HF
bands. On air, as well as spectrum analyzer tests says it's quite clean.
I have some drawings I can scan and send to you if you are interested.
My own experience with the tube is so far in a 2m amp.
73 // Einar // SM3MXR

Howard Aspinall wrote:

> Does anyone on the list have experience of using the QY5-3000A tetrode,
> originally made for VHF television service. This old Mullard product might
> not have surfaced much outside the UK, though there may be some US or other
> equivalent. I would like to exchange notes with anyone who has tried one in
> an hf amp.
>
> Howard Aspinall G3RXH
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>