>
>Thanks Phil,
>
>Need to have 160. What needs to be done to get 160
>meter operation with them?
>
// Add some extra C to the output side of the 160m input Pi-network.
With the SB-220's 9uH filament choke, it takes c. 800pF to accomp;ish
this.
- If it works, why fix it?.
>
>--- Phil Clements <philk5pc@tyler.net> wrote:
>> They are good for 80 meters and up without
>> modification.
>> The FC-15 is rated at 15 amps and the FC-30 at 30
>> amps.
>> (((73)))
>> Phil, K5PC
>> Subject: [AMPS] B&W Filament chokes
>>
>>
>> >
>> > Greetings,
>> >
>> > I recently aquired a B&W FC-15 and a couple
>> FC-30s. I
>> > know they're filament chokes but wonder if anyone
>> > knows anything more about them.
>> >
>> >
>> > Thanks
>>
>>
>>
>
>
>__________________________________________________
>Do You Yahoo!?
>Find a job, post your resume.
>http://careers.yahoo.com
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|