In the Dentron GLA-1000 series of amps I would like to
convert one to a non-sweep tube but keep the exisiting
power supply. I want to maintian it's small size and
fairly light weight. The power supply is a little
whimpy @ about 1150 to 1200 vdc and at about 1 amp
max. Is there a tube out there I could use that would
provide about 500 watts or so of power on 80-10
meters? I only have about 4 inches of vertical height
to work with.
73,
Bill
=====
Bill Smith KO4NR
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|