>
>???? why would 135 watts be too much for 3x813 gg amp??
The 813 has enough cathode emission (c.230mA each) for a finite amount of
drive at a given anode supply potential. More anode V = less drive P.
>seems i have 3200 volts availible at over 1 amp (way over) for plate---have
>had estimates of 800 to 1500 watts out sent to me by the reflector, which
>would be closer to the real power i shud expect?
// At 3.2kV, my guess is a bit under 400 clean W/bottle. I would avoid
AØ.
cheers
>
>
>
>-----Original Message-----
>From: 2 <2@vc.net>
>To: steve <w5set@alltel.net>; AMPS <amps@contesting.com>
To: <amps@contesting.com>
>Date: Sunday, September 02, 2001 8:54 AM
>Subject: Re: [AMPS] 813 amp
>
>
>>>
>>>building new (to me) 3 hole 813 amp. about what kind of power out can i
>>>expect if running plate voltage at about 2800 to 2900 volts. driving with
>>>about 135 watts. just building for 160 to 20 mtr bands. tnx fer any
>info.
>>>steve w5set@alltel.net
>>>
>>// 135w will drive 4 or 5, 813s. P.out is about 350w PEP each at
>>2800v. Transverse 7" fan cooling wud be gud. "Hammer down" will hammer
>>the tubes. A tuning pulser won't.
>>
>>cheers
>>>
>>>
>>>--
>>>FAQ on WWW: http://www.contesting.com/FAQ/amps
>>>Submissions: amps@contesting.com
>>>Administrative requests: amps-REQUEST@contesting.com
>>>Problems: owner-amps@contesting.com
>>>
>>>
>>
>>
>>- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
>>end
>>
>>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|