>Hi Richard,
>
>I didnt know for sure how much capacitance I could go
>up to based on the power supply. I knew 80uf was pry
>the minimum for sure.
// Indeed
>Do you know how much bigger in
>diameter the 200 is vs the 100uf capactitors? There
>are 8 of those guys in there and Im concerned about
>getting them all jammed in there. Maybe the new caps
>are made smaller with more capacitance?
// Yes. Diameter is the primary concern. My guess is the originals
are 35mm dia.
>Im sure you
>know there isnt a ton of room in the NCL for the
>caps,hihi. Thanks a lot for your response...
>
ur welcome, Mark. Your experiences in this matter may be useful to other
NCL owners. Beware of the original screen supply. Since there is no
current limiting, it is a screen killer. An improved NCL-2000 circuit
diagram is on my Web site.
>
>--- 2 <2@vc.net> wrote:
>> >
>> >Hello Everyone,
>> >
>> >Id like to replace the power supply caps in the
>> >NCL-2000 Im working on and need to know a good source
>> >to purchase caps from. I need 8 100 or 120uf caps
>> >at 450-500v. Anyone have any good companies to contact?
>> >Is 120uf a little too much? Its currently got 80uf
>> >installed right now. Thanks and 73,,
>>
>> // 200uF is about right. Digi-Key is one source.
>>
>> cheers, Mark
>>
>> - R. L. Measures, 805.386.3734,AG6K,
>> www.vcnet.com/measures.
>> end
>>
>
>
>__________________________________________________
>Do You Yahoo!?
>Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
>http://im.yahoo.com
>
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|