Amps
[Top] [All Lists]

[AMPS] RJ-iAvacuum relay

To: <amps@contesting.com>
Subject: [AMPS] RJ-iAvacuum relay
From: 2@vc.net (2)
Date: Tue, 21 Aug 2001 08:49:03 -0700
>Here's a link to Allen's vacuum relay page.  I'm not sure if he hi-pot tests
>or not.  It would be worth a message or call to him to find out.  He's got a
>lot of other high power-related stuff too...
>
>http://www.mgs4u.com/relay.htm
>
tnx, Paul

>----- Original Message -----
>From: "2" <2@vc.net>
>To: "Paul Christensen" <paulc@mediaone.net>; "AMPS" <amps@contesting.com>
>Sent: Tuesday, August 21, 2001 8:53 AM
>Subject: Re: [AMPS] RJ-iAvacuum relay
>
>
>> >
>> >I had a similar experience with RF Parts several years ago.  I had
>ordered
>> >either a Jennings RJ-1A or Kilovac HC-1 and upon receipt, I noted that it
>> >was surplus and looked like it had been in a very corrosive environment
>for
>> >an extended period of time.  Knowing that the outside condition is not
>> >indicative of a vacuum relay's performance, I installed it only to find
>that
>> >it was also electrically defective.  I received full credit from RF
>Parts,
>> >but what disturbed me most was that I paid top-dollar (~$90 - $100) for a
>> >surplus relay.  Nothing on their web page indicated that the product was
>> >used and surplus.  Again, this was several years ago and they may be more
>> >forthcoming with this fact.  Anyway, I've been purchasing surplus RJ-1As
>> >through Allan Bonds in Marietta, GA for a fraction of the RF Parts price
>and
>> >so far, I haven't been disappointed.
>> >
>> What is Bonds' address/phone #?
>> -  Anyone who buys or sells vacuum components needs a high-potential
>> tester.  So do amplifier repairmen.  If anyone is building a high-pot,  I
>> have an extra Dale, 55M-ohm HV current-limiting resistor that will drop
>> 16.000V continously.  The price is right.
>>
>> cheers, Paul
>>
>> cheers, Paul
>> >----- Original Message -----
>> >From: "2" <2@vc.net>
>> >To: "AMPS" <amps@contesting.com>
>> >Sent: Monday, August 20, 2001 11:58 PM
>> >Subject: [AMPS] RJ-iAvacuum relay
>> >
>> >
>> >>
>> >> I tested a used RJ-1A vacuum relay today that had almost no vacuum.
>The
>> >> seller was RF Parts.
>> >> -  Caveat Emptor.
>> >>
>> >> -  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
>> >> end
>> >>
>> >>
>> >> --
>> >> FAQ on WWW:               http://www.contesting.com/FAQ/amps
>> >> Submissions:              amps@contesting.com
>> >> Administrative requests:  amps-REQUEST@contesting.com
>> >> Problems:                 owner-amps@contesting.com
>> >>
>> >
>> >
>> >--
>> >FAQ on WWW:               http://www.contesting.com/FAQ/amps
>> >Submissions:              amps@contesting.com
>> >Administrative requests:  amps-REQUEST@contesting.com
>> >Problems:                 owner-amps@contesting.com
>> >
>> >
>>
>>
>> -  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
>> end
>>
>
>


-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>