At 02:20 PM 8/18/01 -0600, you wrote:
>Hi Steve,
>
>Yup...those are the exact dimensions alright! It runs off 240 VAC single
>phase, and
>I installed a little power supply and relay driver circuity so that
>grounding a wire
>switches the amp into XMIT mode and also applies 28 VDC to the external
>antenna
>relays.
>
>I think the weight now may be a bit less than 600 poungs, though, since it
>no longer
>has the auto tuning module (has to be tuned manually) and I did remove the
>driver RF
>deck (which reduced the weight a little bit, anyway). But it still is a
>pretty
>heavy duty brute! I sit mine here on a little plywood platform with
>casters on it.
>
>Please let me know if you run across any HFers in the Pacific Northwest
>who might be
>interested ;-) Won't run 14 kw on 160m, but then again, you CAN afford to
>pay the
>electric bill for the filaments on THIS amp ;-) Should be able to stick
>in a pair
>of 4CX1500's I suppose if you really wanted to melt coax. TNX and VY 73,
>Lance
>--
>Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8)
>P.O. Box 73
>Frenchtown, MT 59834 USA
>QTH: DN27UB
>TEL: (406) 626-5728 FAX:(406) 728-6320
>URL: http://www.bigskyspaces.com/w7gj
Hi Lance,
The 204F had not autotune features, manual only, otherwise sounds like the
204H is almost the same. I have a page at my website with photo''s, schematic
and other data. The 204F is basically the big brother of the 30S-1. It is
S-line
in color, style and parts, as a matter of fact, a number of parts are the same
in the 30S-1.
Good luck in finding it a new home.
/s/ Steve, N2CKH
http://www.qsl.net/n2ckh
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|