This will only work for a solid state transceiver if you have an antenna
tuner to correct for the
reactive input impedance of the off tuned inputs.
An 820 or 830 have tube finals and can match a wide range of impedances via
the
PI output network.
73
Bill wa4lav
At 07:41 AM 8/16/01 -0400, you wrote:
>Carl,
>
>The SB-200 will operate well on 12 and 17 in the 15 mtr. band switch
>position. I've been doing that for a long time with no problems. The rig
>here is a TS-530S so have no difficulty with the mismatched input.
>
>Steve W4IMF
>
>----- Original Message -----
>From: "carl seyersdahl" <carlseye@tampabay.rr.com>
>To: "amps" <amps@contesting.com>
>Sent: Wednesday, August 15, 2001 7:58 PM
>Subject: [AMPS] sb200/201
>
>
> >
> > can anyone tell me what problems I might have in trying to use an sb200
>on
> > 17 and/or 12 mtrs. other than likely a very high input swr?? I don't have
>an
> > amp of that type operational at the present time!!I'm remodeling one but
> > that's a long term project, and at that I might want to include those
>bands.
> > thanks.
> > carl / kz5ca
> >
> >
> > --
> > FAQ on WWW: http://www.contesting.com/FAQ/amps
> > Submissions: amps@contesting.com
> > Administrative requests: amps-REQUEST@contesting.com
> > Problems: owner-amps@contesting.com
> >
> >
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|