On Tue, 7 Aug 2001 02:32:15 -0400, Tom Rauch wrote:
>Be sure it opens AFTER the input relays opens also!
_________________________________________________________
In all this discussion, nobody has mentioned the bias switching. IMO,
the amp should not be biased on until all the relays have closed and
must be biased off before any of them open.
Ensure that, and you can rest much easier.
Bill, W7TI
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|