>
>I don't understand what G2DAF has to do with this? Please explain?
>
The three G2DAF amplifiers that I've measured on the air had IMD of no
better than -22db below PEP. Eimac says that tetrodes need regulated
screen voltage for best linearity. The DAF uses wildly fluctuating
screen-V.
cheers
>The box adds no Shit to the signal ....
>From what I'm told, turning up the mic gain or processor button on a FT1000
>just a few minutes to much, makes alot of Shit .... Common huh?
>
>Einar
>
>Bob Marston wrote:
>
>> Einar wrote
>>
>> >I know a Swedish guy who has made some little box that would do what you
ask
>> for.
>> >It has independent maximum output adjustment for every HF-band in the
>FT1000.
>> >Hearsay states that it works perfect. No more problem with over driving
>pa's.
>>
>> One would suppose it is as clean as a G2DAF.
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|