Hi Dick,
That relay has the cover screwed on by for small screws, which are only
accessible from the underside. Your only option is to unsolder the relay
completely :-(
Vy 73 de OZ1PIF, Peter
Sound clips from OX2K operation "off the air":
http://hjem.get2net.dk/oz1pif/OX2K-sound.htm
********** OZ1PIF **************
email: oz1pif(no-spam-filler)@get2net.dk
http://hjem.get2net.dk/oz1pif
Shack Ph. +45 4619 3208
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
----- Original Message -----
From: "Richard Brown" <rjbro@bellsouth.net>
To: <amps@contesting.com>
Sent: Sunday, July 29, 2001 2:53 PM
Subject: [AMPS] fl21ooB
>
> Hello. I have an FL 2100b which needs the contacts cleaned as I loose
> signal on receive. contacts are dirty. Relay is enclosed in plexiglass.
> Any body have recommendations on how to remove the plexiglass case? Does
> the plexiglass cover really need to be on?
> Thanks
> Dick W5AA
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|