Amps
[Top] [All Lists]

[AMPS] Water Cooling 2C39's

To: <amps@contesting.com>
Subject: [AMPS] Water Cooling 2C39's
From: K7xq@aol.com (K7xq@aol.com)
Date: Sat, 28 Jul 2001 04:57:14 EDT

--part1_122.2530b6d.2893d86a_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Hello All,
 Have a question on water cooling 2C39 Tubes. I am new to water cooling any 
kind of tubes. I just acquired a 1296 Dual 2C39 Amp with water jackets 
installed on the 2C39 tubes. I understand that these jackets are at the 1200 
VDC Potential. If I run water through the jackets, should I be concerned 
about any conductivity that might flow through the water to ground ( Is there 
such a condition ?? ). What kind of non conductive tubing can I use to flow 
the water through the tubes ( aquarium tubing or something ??? ).

Jeff K7XQ
http://members.aol.com/k7xq1/k7xq.html


--part1_122.2530b6d.2893d86a_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

<HTML><FONT FACE=arial,helvetica><BODY BGCOLOR="#ffffff"><FONT  SIZE=2>Hello 
All,
<BR> Have a question on water cooling 2C39 Tubes. I am new to water cooling any 
<BR>kind of tubes. I just acquired a 1296 Dual 2C39 Amp with water jackets 
<BR>installed on the 2C39 tubes. I understand that these jackets are at the 
1200 
<BR>VDC Potential. If I run water through the jackets, should I be concerned 
<BR>about any conductivity that might flow through the water to ground ( Is 
there 
<BR>such a condition ?? ). What kind of non conductive tubing can I use to flow 
<BR>the water through the tubes ( aquarium tubing or something ??? ).
<BR>
<BR>Jeff K7XQ
<BR>http://members.aol.com/k7xq1/k7xq.html
<BR></FONT></HTML>

--part1_122.2530b6d.2893d86a_boundary--

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>