snip
>>I can use a series of measurements to determine the approximate
>>value of R and L in most cases, but I've also found many cases
>>that require testing of several PA's to optimize suppression. A
>>simple formula would certainly save work!
>>
>/\ First off, one needs to realize that roughly equal currents need to
>flow in L=supp and R-supp at the anode's VHF resonant freq.
Why is this ratio optimum? I would have expected to get greater damping if
you put a higher percentage of the current through the resistor.
Steve
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|