>
>Hi Gary,
>
>At 02:37 PM 7/1/01 -0700, you wrote:
>
>>Hi to the list,
>>
>>I asked a similiar question not long ago but this time
>>am making it more specific. If you have the AL-811 or
>>the AL-811H please send the following:
>>
>>* Which amp - the 811 or 811H?
>>* Your power out in SSB?
>>* How you made the measurement?
>>* Your meter readings during voice peaks on SSB?
>>* Your exciter drive power to get max power out?
>>
>>Thanks so much.
>>
>>73 de N5PHT, Gary
>>
>
>In my opinion either are good if you can find one in new condition
>for less than half the new selling price.
>
>I have an AL-811 that hits max drive at 60w, beyond that you
>will overdrive the ampfifier and either ALC hookup is needed or
>a monitor scope.
/\ Neither an o'scope or ALC will prevent the amplifier from being
overdriven on the leading edges of hard syllablres. A cathode feedback
resistor of the right value will.
>
>It does work on the WARC bands, but I need to turn on the rigs
>automatic antenna tuner for all three WARC bands to get a good
>VSWR as the tuned input circuit is not broad enough. They have
>the units set up for double duty rather than separate tuned inputs
>for the WARC bands, at least my version. My SB-220, with the
>exception of 30m, blows this input circut away.
>
> ...
/\ Does the AL-811 have 2-tubes?
tnx, Steve
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|