Amps
[Top] [All Lists]

[AMPS] SB220 Modification to 6m Recommendations

To: <amps@contesting.com>
Subject: [AMPS] SB220 Modification to 6m Recommendations
From: kb7ww@uswest.net (KB7WW Art Moe)
Date: Wed, 20 Jun 2001 16:30:16 -0700
A good start would be to find a SWAN Mark 6 B to look at.

Manual can be found at.

http://6mt.com/swan.htm

scroll down

Art
KB7WW

"Robin E. Midgett" wrote:
> 
> Greetings,
> I have recently become interested in modifying a Heathkit SB220 for
> monoband 6m operation. I'd like to have the recommendations of the readers
> on what set of procedures to follow for the most reliable & effective
> conversion. Stability, clean output & reliability are the important
> factors, followed by RF output. I will probably run the amp on 220 VAC.
> Thanks for your consideration.
> 
> 73,
> Robin E. Midgett KB4IDC
> VHF+ Glutton
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>