>
>
>Looked thru a LOT Of the archives and did not see, any references to plans
>for building a
>HF (not VHF) amp using a couple of 4cx250b's. I have one old ARRL circa
>1975 set I am
>going off of now, did a couple hours on the web looking thru but no joy. If
>any one has
>references to or can point me in the right direction to info, would
>appreciate it.
>
>DE KA1MWP
>
>
>Chuck Partain
>maXtor Corp
>Shrewsbury, MA
>508-770-3496
>
/\ I built a 2x 4cx250R SSB AB1 amplifier for 2m. I never drew a
roadmap of the circuit I used because it was so simple that I had it in
my head. If you would like to talk about it on the telephone, I can
describe the circuit to you. - please see my Web site for info on
bypassing the telemarketer filter. If I am not here when you ring,
leave a voicemail msg. and I will return your call.
cheers, Chuck.
- R. L. Measures, 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|