This information is available from a variety of sources; e.g. , such as
McGraw Hill's, "Standard Handbook for Electrical Engineers", Fink & Beaty,
Chapter 20.
There is are fairly extensive bibliographies for both DC and AC motors if
you need to dig deeper.
Ed, N1TS
----- Original Message -----
From: "Phil Clements" <philk5pc@tyler.net>
To: "Phil Levin W2GE" <w2ge@home.com>; <amps@contesting.com>
Sent: Sunday, May 06, 2001 4:10 PM
Subject: Re: [AMPS] OT: Elec. Motor basics 101????
>
> > 2.) What is the difference in a motor designed for AC vs. DC?? How do
you
> > come up with design parameters for winding the armature??? I.e. say for
> > torque vs. an armature for high rpm????
>
> What I know is ancient and could not even fill a thimble, Phil
> I do remember that a D.C. motor reaches maximum torque at zero rpm.
> That is why D.C. was chosen for locomotive engines, I guess.
>
> (((73)))
> Phil, K5PC
>
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|