Dean Wood wrote:
>
> Whenever I key the SB-200 with my transceiver, I see
> varying degrees of blue flashes on both 572B tubes.
> At very low drive levels (10W), I see a blue tint on two
> sides of both tubes. At high drive levels, blue flashes
> actually jump through the top of the SB-200 chassis,
> providing for quite a light show.
Blue glow from the glass of the tube envelope is harmless; it's caused by
electron bombardment. If it appears that the area inside the plate is glowing
it may be a sign of gas in the tubes, in which case you will probably need to
replace them. Are you getting normal output, plate/grid currents, etc.?
73,
Vic, K2VCO
Fresno CA
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|