Amps
[Top] [All Lists]

[AMPS] Clipperton conversion

To: <amps@contesting.com>
Subject: [AMPS] Clipperton conversion
From: baycock@HIWAAY.NET (Bill Aycock)
Date: Thu, 22 Mar 2001 16:00:43 -0600
Thanks, Billy
That makes it a later model than the "-L", rather than earlier. Did the QRO
have tuned input?

Thanks- Bill-W4BSG

At 03:49 PM 3/22/01 -0600, you wrote:
>> Tom- you keep saying "Clipperton-L" and W4EMF says "Clipperton QRO".
>>There seems to be some differences in the Amp panel and Mine- could you
>find >out the serial number of the original, and if it was really an "L" or
>not?
>
>Bill,
>
>Both amps use the same 4x572b tubes ... mainly cosmetic differences
>in the front panel meter and trim ... the pictures are for the QRO
>which was one of the later models before Dentron went O.O.B.
>
>Hope this helps ...
>
>73 Billy AA4NU
>
>
>
-
Bill Aycock   ---   Persimmon Hill 
 Woodville, Alabama, US 35776
 (in the N.E. corner of the State)
      W4BSG   --   Grid EM64vr
        baycock@HiWAAY.net
             w4bsg@arrl.net

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>