I need some advice from the experts. I have a recently brought back to life
GG 3cx3000a7. Its running on a higher plate voltage, approximately 6700KV.
When tuning up on 10 meters with a TS 440 into a dummy load, with
approximately 70 watts drive I am only seeing 200 watts on the Bird. What's
odd is the Jennings 10-370pf plate tuner is backed all the way out to the
minimum capacitance and that's where It tunes for max output. I thought it
would tune around at least 25pf but its backed all the way out. What should
I expect to see with say 100 watts input provided tank is right?
KRS
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|