| To: | <amps@contesting.com> |
|---|---|
| Subject: | [AMPS] K2RIW Amps |
| From: | Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK) |
| Date: | Mon, 26 Feb 2001 06:42:58 +0000 |
measures wrote:
>
>>
>>measures wrote:
>>>
>>>>
>>>>
>>>>The practical limit for good linearity is about 500W in strict class AB1
>>>>(ie zero g1 current).
>>>>
>>>>The Eimac data sheet for 4CX250Rs suggests more power is available...
>>>>but look how the linearity suffers!
>>>>
>>>I ran a pair of paralled 4cx250Rs on 2m SSB. The tank was 1/4 wave.
>>>With a screen current of c. 5mA (@400screen-v), the linearity was good.
>>>Output was c.900w PEP on SSB.
>>
>>"The linearity was good"... for California. Here in Europe you'd find
>>your coax cut.
>>
>... a terrorist threat.
... or the sincerest form of signal quality report.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.com/g3sek
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [AMPS] K2RIW Amps, measures |
|---|---|
| Next by Date: | [AMPS] K2RIW Amps using 4CX400?, Hans Goldschmidt |
| Previous by Thread: | [AMPS] K2RIW Amps, measures |
| Next by Thread: | [AMPS] K2RIW Amps, measures |
| Indexes: | [Date] [Thread] [Top] [All Lists] |