SELL: a complete array of components for someone comtemplating a homebrew
linear amplifier project but having difficulty locating the parts. The
majority of the parts were carefully removed from a 10-80M Drake legal
limit L4B and subsequently retrofitted for 6meters. The package
consists of:
1. New Muffin Fan
2 & 4 Drake plate and antenna tune air variables w/plate tune shaft
vernier and choke bypass
3 One piece bandswitch/coil combination ready to drop in. No RF burn
marks, no cut wires.
5 Drake plate HV choke and parasitic choke(s) assembly with blocking
caps
6 Drake pre-tuned fully adjustable tuned input circuit with cog and
drive hardware for simultaneous input and bandswitching. Complete with
coupling capacitor,and all coax.
7 New 3 minute 110VAC solid state timer relay
8 New (3) zener diodes 12VDC@10W
9 New 3P3T antenna changeover relay for legal limit ++
10 Pair of 8877 (3CX1500A7) air system sockets with grid to ground tabs
All of the components have been "surgically" removed from the Drake
intact. There are no cut wires. The RF switch looks like new and has no
burn marks on any contact. $285+ shipping Ron W2CQM New York City
http://homestead.juno.com/w2cqm/files/RFDeckParts.JPG
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|
