Amps
[Top] [All Lists]

[AMPS] FS: Parts that may be of some use in amplifiers

To: <amps@contesting.com>
Subject: [AMPS] FS: Parts that may be of some use in amplifiers
From: wc6w@juno.com (Radio WC6W)
Date: Wed, 17 Jan 2001 22:20:30 EST
************************ Coax Connectors ***************************

  used Andrews Heliax UHF connectors  1/2"  44AP male   $10 ea

UG-643  C Female-Female barrel connectors, used $3 ea
UG-637  UHF Male to C Female adapters, used  $5 ea

HN male to N female Adapter little used $10

************************ Panel Meters  *******************************

Analog Devices  AD2004 4½ Digit LED 2 (1.9999) volt Panel Meter; NOS w/
data sheet $40

FLW Model 204B2, ER2  & model 204B-2D1,ER2,01 digital panel meters
w/internal 120VAC power supply. 
 4 digit display plus a minus sign; 3½ or full 4 digits ?? Full scale
unknown--  $25 pair

GE 50-283013MTMT1 3" thin edgewise panel meter 10V scale NOS in box --
$15

GE DO-41 3" round meters $7 each
   
   600 MA  750MA

GE DW-44 2" round 8A RF Ammeters w/ internal thermocouple  $15 ea

Simpson 45  3" round VU meter $15

Westinghouse 3½" Square RX-35 series meters  $10 each

   15 VDC   20 VAC   15 MA   25 MA   50 MA   100 MA
   &  500 MA scale (10 MA actual movement on this last one)

Weston 301 3" round meters $7 ea

   10 VDC  2 MA  5 MA  15 MA  150 MA  300 MA  500 VDC
   3A RF (requires external thermocouple)

       1301 3"  2A

Weston 425, 100 mA  3" round RF ammeter w/ internal thermocouple $15 
    

****************** POWER TUBES *********************

450TH Eimac -- These are the pulls and spares from what was a working
 power amp. in the estate.  $100 ea

7580W/4CX250R (Amperex / Eimac) pulls $25 ea --or-- 5 for $100

7034/4X150A pulls $10 ea --or-- 5 for $40


--------- Planar Tubes-----------
2C39A pulls $10 ea (one left)
7698 pulls $5 ea
7843 pulls $5ea
Y602B pull $5 
Y2177 pulls $5 ea
EE144 pull $5

-------- Lighthouse tubes -------
2C40A pulls $5 ea
2C46 pull  $5 
446A pulls $5 ea

-------- Pencil tubes -----------
4043 RCA  $5
6442 pull $5 ea
7554 pull $5

--------- Acorn tubes -----------
6F4 used $4
954 used $2 ea
955 used $2 ea
956 used $2 ea

-------- Subminiature tubes -----
Some new, some pulls... $3 ea
1AD4
VX55
DM160
CK1054  
5639
CK5676
CK5703
5829
5872
CK5896
CK5899
5902  
6021
6111
6112

--------- and the rest -----------

5763 pulls/NOS $5 ea
4637 (RCA) pull $40
6481 new $50 
        
****************** SOCKETS **********************

 Eimac SK-1500A mounted to a 17" square aluminum panel.  Includes a
current transformer to monitor filament current.  $200

 Johnson 211 / Birnbach 434 "50 watt" sockets fit 450TL/TH etc. used $20
ea

"Ring" style 4 pin sockets with a small metal post similar to
 Johnson 122-234, fit 5D21, 705A, 715A/B (per the Johnson catalog) used
$5 ea

 Johnson 248 / RCA  UT-106 & Other 7 Pin Septar (for 8877, 829, etc) used
$10ea

 Eimac SK 510 socket, "Overused": One screen contact missing - lower air
channel milled off  for 4-1000A / 3-1000Z  fine for a lamp!  $10
 
4CX250 family sockets --
 Johnson 124-115-2 new (tarnished from age) $25 ea, used $15 ea
 Eimac SK 610 (cathode grounded)  used $15 ea
 Eimac SK 606 Chimneys  like new! :-)  $10 ea.

 Eimac HR-6 Plate Caps (for 3-500Z, 4-400A, etc.)  One NOS in Eimac bag,
one used -- $10 both.

 Eimac HR-8 Plate Caps (for 3-1000Z, 4-1000A, 450TL/TH, etc.) used -- $15
pair

************* VACUUM VARIABLES ********************

Jennings Vacuum Variables -- all used (or at least aged) 

UCS-300-15S     300pF   15KV    $250  with standard puller,
later manufacture (blue)    
UCSL-750        750pF   3KV     $150  with standard puller  
UCSL-1000       1000pF  3KV     $150  with standard puller

R1G  SPST 20KV 20Amp Vacuum Switch  $100

---------Fixed vacuum caps----------

Jennings VC-12  12pF    20KV    $25
Jennings               50pF     86KV    $86
Western Elec    100pF   5KV     $50  (This one hi-pot checked
@ 14KV)


********************** Air Variable Capacitors *******************

Hammarlund NZ-10 Neutralizing capacitors, shiny NOS,  $25 pair

Johnson 154-506 Dual 153pF 3KV air variable used, good ¼" shaft, $20ea (2
available)

Johnson D Series Dual 200pF .080 air spacing about 4"x4"x8" overall, ¼"
shaft $20

National Type DX, 100pF, .175 air spacing, about 4"x3.5"x7" overall, ¼"
shaft $8 

G.I. Corp 70 pF, .080" air spacing, about 3.5"x3.5"x3" overall, ¼" shaft
$2ea (2 available)

Cardwell 400pF, .045" air spacing, about 4"x4"x3" overall (plates open)
¼" shaft. $5ea (2 available)

MM Co. Four section 365 pF, large receiving type, 7½" long overall w/
3/8" shaft. NOS $10

Radio Condenser Co. Four section 400pF, wide spaced receiving type, 10"
long overall w/ 3/8" shaft $10  

********************** Fixed Coils *******************************

55 uH silver plated edge wound .200 x .05 buss wire.   5" diameter by 10"
long overall  $30

20uH plated #14 wire on 2½" ceramic form; aged but unused  $5 ea. 

Filament choke for GG amp.  Bifilar wound #10 wire on ½" dia. by 7½" long
ferrite form.  Used, good condx -- $15

**************  MICROWAVE  *********************

Hewlett Packard 930A Switch  WR-90 X - band  $30
        Note: this is a waveguide part

IMPATT Diodes -- NOS individually packaged with test data
        NEC ND8P15-5H-C  1W @ 14.8 GHz  $75 ea
        NEC ND8V12TU    2.5W @ 12.6 GHz  $100 (one only)
        Loral GC-5831E  300mw  @ 12.5 Ghz $40 ea

Microwave Mixer Diodes (I think!) -- NOS in original capsule packaging
        Sylvania D5163  4 pcs           $40 all


**************  Mechanical Things **************

Cannon 2-1 reduction Right Angle Drive -- threaded 5/16" shaft on the
slow side,
 1/4" round shaft on the fast side.  Cast aluminum? frame with brass
bearing inserts.
used $15

Millen Model 10000 16-1 worm gear reduction Right Angle Drive.  Ollllld,
& the 
anti-backlash springs are rusty, but the rest is fine (brass, aluminum &
stainless)
 & it works o.k. used  $15

Millen Model 10012 1-1 Right Angle Drive.  Shafts look to be original
length.  
Four small, nicely done, tapped holes in the frame don't appear to be
"stock". used $15

National "Velvet Vernier" 5-1 reduction drive with 180 degree 0-100 scale
& Knob. 
  Attached GE ceramic coupling output bushing has been reworked (poorly)
to 3/8". 
 This latter part just unscrews if you don't like it! used $15

National "HRO" 5 window knob with numbers, black w/charcoal grey skirt --

I think this was new but, picked up a couple of small scuffs & scratches
from 
the rest of the stuff in the drawer. $25

Sanyo-Denki 103-775-0611 Stepper Motors -- 1/4" dia. shaft extends about
3/4" out each end.  
Outer Case is about 2.2" round, with a square flange on one end, by 1.5"
deep.  
1.8Deg (200 step/rev) 2.25V, 1.25A, 8 lead configuration presently wired
as 4 lead units 
(I think the coils are wired in series for bi-directional drive @ 4.5V)
to "Molex" connectors. 
 RFE  10 pieces, $150 all

NOS fan that fits some Japanese radio...marked:  57 10.01  100V
  The wires from the motor are about 4' long and are terminated in a 2
pin JST connector.  
  The impeller has 8 blades and is 7 cm in diameter.
  It is mounted to a U shaped metal frame with four mounting holes spaced
5cm by 9cm
  $10

Craftsman 335.25926 "Drill Press" -- adapts a 1/4" electric drill (not
included)
 to function as a small drill press.  Used, but not much! $25


**************  MISCELLANEOUS *****************

Sarkes-Tarzian Model 78D center-tapped Selenium Rectifiers. NOS! $5ea

TIP34A 10A 60V TO-218 PNP Power Transistors, Motorola NOS.  4/$1

General Electric WW2 vintage (has that BC-375 look) 7 position RF switch.
  Very solid detents! Old yet, appears to be UNUSED!!! The center contact
 assembly has been reinforced with solder.  $10

Bird switch "innards".  The center shaft & contact assembly plus rear
plate
from what looks to been a SP4T Bird Coax switch.  N connectors.  $10

Filter Cap Assemblies: Eight 80 uF/450V axial electrolytics mounted to a
5"x8" fiberglass
 PCB -- these are currently wired sort of series-parallel but, could be
reconfigured by
 cutting & jumping a couple PC traces.  $20 ea. (2 available)

Square D, size 2, two pole, contactor rated at 50 amps (600 V max).  The
coil is 120VAC -- $10 used

Ohmite 20K 225W adjustable resistor (NIB; hmmm make it OIB: Old in Box) 
$8

Westinghouse 6-1-1B/1N1188 3 Phase 600V 35 Amp rectifier assembly 
with heatsink.  Unused but, tarnished from long storage  $10.

Collins 672-2110-00,  7.5VCT 24A Filament Xfrmr  210/220/230/240/250
Primary (no 110!) -- One
 of the 7.5V terminals is broken off but, the wire is accessable in the
potting.
FREE!!! (plus shipping) w/$25 purchase from this list.  


All of the above plus shipping, if necessary, naturally.

Contact:  Marv  WC6W   310 649 3111 (reasonable hours Pacific Time
please) 











*

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] FS: Parts that may be of some use in amplifiers, Radio WC6W <=