In a message dated 1/15/01 12:55:38 AM Eastern Standard Time, w7xu@dtgnet.com
writes:
>
> Hello all,
>
> Where can one find specifications for various models of Dayton
> blowers? I've done some looking on the web but haven't had
> much luck. I have a second hand amp I picked up that runs an
> 8877 with a Dayton 1C180 blower -- I'm wondering if the blower
> is large enough. (Yes, I suppose I could hook up a manometer,
> but I would like to find the general specs on Dayton blowers
> in any event).
>
> Thanks & 73,
>
> Arliss W7XU
> ==========================================================
Arliss,
Descriptions of the Dayton Blowers can be found in the "GRAINGER" catalog.
This catalog is on the web under the Grainger name.
I think there is a web site for Dayton Blowers also.
If you need further assistance, e-mail me directly.
I don't think the 1C180 is listed any longer but you can find an equivalent
blower.
I used a 4C443 for my 8877 and it works very well.
73 de
Dave in Dayton, WT8R
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|