In message <200101021534.f02FYv921719@contesting.com>, measures
<2@vc.net> writes
>
>>Rich says:
>>
>> >With a 4-250A or 4-400A, it takes c. 75mA of ZSAC
>> >for good linearity. In order to obtain 75mA of ZSAC
>> >with 0v bias, one needs c. 3500v.
>>
>>Even then, you're pushing things to get more than about 400 watts out with
>>reasonable linearity. In fact, nearer 4kV is better.
>>
> common bandswitches can not handle 4kV safely.
And many ham amplifier and tuner manufacturer's won't use the proper
thing as their too expensive.
>cheers, Peter
>>
>>
>>
>
>
>- Rich..., 805.386.3734, www.vcnet.com/measures.
>end
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|