> and went into the IFR's antenna port. So now with the CW input reduced to
> 10 db below the top line, everything is fine clear down to the baseline.
> Now it couldn't be overloading the TX port on a 100w CW signal, 5db below
> the top line?
What selectivity are you using on the IFR?
What sampling or scan rate?
Does the IFR have peak storage?
If so how many sweeps is it making in a sample and how fast are
they?
73, Tom W8JI
w8ji@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|