Amps
[Top] [All Lists]

[AMPS] SELL: RF Deck components

To: <amps@contesting.com>
Subject: [AMPS] SELL: RF Deck components
From: w2cqm@juno.com (w2cqm@juno.com)
Date: Sun, 24 Dec 2000 15:39:12 -0500
SELL: a variety of surplus to my needs RF deck components (click on site
below) consisting of: 

1. SP10T High power bandswitch manufactured by Radio Switch.. Will handle
15KW. Currently set up for 4 positions on each pole. 6 additional
positions can be added with short lengths of  "L" shaped HD copper.
Porcelain switch supports are predrilled and channeled for easy
installation. Will supply mounting hardware. Switch had detents and
positions can be locked out if not used. $120 + shipping (Add $20 if you
want me to add the positions)

2-5 8877 chimneys (price   + $3 shipping):
        2. $15
        3.$15 Eimac w/o base
        4.$40 has multi silvered HV spring loaded anode tabs for easy hookup  
        5. $35 heavy wall teflon

6-7 Turns counters 3 digit (close in appearance but not matched) +
shipping
        6. medium duty $40
        7. heavy duty cast $60

8-10 Porcelain 8877 sockets (+$3 shipping)
        8. air system drop in socket with grid to grnd tabs $30
        9. air system socket no G/G tabs                           $20
        10. Porcelain socket (plain)                       $15

11-13 High voltage Plate chokes (shipped)
        11. National Radio 1amp with mounting hdwe. $8
        12. B&W 800 $12 
        13. Ameritron HV plate choke fits AL80A,80B, 82, Al1200 and AL1500
repaired broken wire between windings.Works     perfectly $12

14. Eimac 3CX800A7(s)  with socket and chimney ( chimney not shown) New
tested only. Command Technologies  2500 spares. Date code 1995. $325 +
shipping (0ne) $625+ shipping (pair)

15. Solid state 180 second timer.110VAC primary @ 1 amp to control HD
transformer contactor $15 shipped. Essential for indirectly heated
cathode tubes that require  warmup with no HV on the plates:
(3cx800A7/8877/4CX10001500) 

16. Ameritron pin diode QSK 5PC board. Removed working from AL1200. Will
fit AL80A, 80B, 82, AL1200 and AL1500. All wired attached (6) for easy
internal installation. Complete with mounting plate, spacers, hardware,
and installation/instruction manual. Will handle 2500W SSB, 2000WCW, and
1000W RTTY. $200 shipped.
Ron W2CQM New York City 

http://homestead.juno.com/w2cqm/files/Compamp.jpg


Epilogue: See QRZ.COM for the listing of the  most recent articles
written  for QST and 73 Magazine authored by W2CQM.
http://www.qrz.com/callsign.html?callsign=w2cqm

        

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] SELL: RF Deck components, w2cqm@juno.com <=