The 92 handbook has a nice design for a 6M linear using the 3CX800A7. The
power supply should be ok. You can mount a new filament transformer in the
bottom. Tube can mount where the one of the 572's used to mount. Cover the
other hole. Remove the
old input circuitry and replace with whats called out in the design. Apply
coolong air with an approperate blower to a new hole through the
back. Have fun.
de Norm N8NH
At 12:03 PM 12/9/00 -0800, you wrote:
>Any info on converting an SB-200 to a 3CX800 then to 6 meters?
>
>Thanks...
>
>Rich N7TR
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|