Amps
[Top] [All Lists]

[AMPS] Spark-plug gaps

To: <amps@contesting.com>
Subject: [AMPS] Spark-plug gaps
From: ewell@cvc.net (Edward Ewell)
Date: Wed, 22 Nov 2000 10:25:38 -0800
Hi Group:

    Yes get the feed line on the ground, a knife switch will not do it, don't
let it into
the shack.


Cheers    Ed..



measures wrote:

> >
> >measures <2@vc.net> wrote:
> >>A typical lightning strike is c. 100kA.  This is beyond the capability of
> >>spark plugs.
> >
> >
> >Although I suspect it's beyond the capability of anything I could do, I'm
> >open to suggestion.  What should I use for lightning protection on my
> >open-wire line?
> >
> It is presumably not a good idea to provide a conductive path for
> lightning to enter your home.  //  Install a double banana-plug
> disconnect where the open-wire line enters the house.  When not using the
> radio, disconnect the banana plug and allow the feed-line to fall onto
> the ground.
>
> Chuck
>
> -  Rich..., 805.386.3734, www.vcnet.com/measures.
> end
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>